HERE

How to Clean Dimension One Hot Tub Jets

How to Clean Hot Tub Jets

When it comes to owning a Dimension 1 hot tub, you get to enjoy a relaxing time each time in the hot tub. But from time to time there is some maintenance you should perform to help maintain the life of the tub.  One of the top questions is how to clean hot tub jets.  When it comes to cleaning your jets, there are some steps you should take beforehand. In addition, if you have more questions about hot tub maintenance contact the experts at Sunny’s Pools & More.

Hot Tub Jets Cleaning Steps

You should clean your hot tub every 2 – 3 months depending on use.  The first step is to drain the water in the hot tub. Next, you unscrew and remove the jets you want to clean. You then soak the jets in vinegar and water overnight.  The acid in the vinegar will eat away unwanted scum and materials. Additionally, to vinegar, you can then use a small scrubbing brush to clean the gears and other small parts. Once you are done you can then put the jet back in the tub.

If you are not comfortable with removing the hot tub jet, you can fill the tub with clean warm water and add dishwashing detergent to it. In addition, you can add bleach as well. Once you have added that, you can run the jets for 15 minutes. After that step, drain the tub and run cool water for 15 minutes to remove the remainder of the soap and bleach.

Of course, this is just a few steps to help maintain the life of your Dimension One hot tub. If you have more questions on maintenance or hot tubs in general make sure to visit your local Sunny’s Pools & More today! Finally, Sunny’s has four great locations in Flat Rock, Macomb, Waterford, and in Monroe.